Mitel SX-200 Documentation page 353

Superswitch electronic private automatic branch exchange epabx

Hide thumbs Also See for SX-200:

Table of Contents

SECTION MlTL9105/9110-096-i

Hands-free operation allows a SUPERSET

or called party by means of the set speaker and microphone (the

handset is left on-hook). The speaker on/off feature allows a SUPER-

SET 3 user to receive and make calls without lifting the handset. This

feature can be activated during a call, or prior to making or answering

a call, and can be used on any of the lines appearing at the set. The

redial features, without previously lifting the handset, selecting a line,

or obtaining dial tone.

A Loop Trunk cannot be transferred to a SUPERSET in the Hands-free

To Use the Hands-free Feature to Make or Receive Calls:

Press the SPEAKER ON/OFF button.

Select the line required to originate or answer a call. If originat-

ing a call, dial tone is heard from the speaker. If answering a

call, the caller can be communicated with by means of the

speaker and microphone.

On Completion of a Call:

Press CANCEL button or SPEAKER ON/OFF button.

The microphone can be turned off, (e.g., when required to

consult privately with another person near the SUPERSET 3),

by setting the MIC. switch to the OFF position.

At any time, the conversation can be made private by using

the handset. Lifting the handset disables the speaker and mi-

crophone. To return to hands-free mode, press the SPEAKER

ON/OFF button and replace the handset. Speaker and ringer

volume can be adjusted by means of a single volume control.

3 user to speak with a caller

Chapters

Table of Contents