Error
Applies to:
Control Plan Mode
c 5
Table Mode
Table Mode
C6
SECTION MITL9105/911
TABLE 8-1
CONFIRM
CODES
An attempt was made to assign a table which is
currently assigned elsewhere. Pressing the
CONFIRM button will deassign the table from
wherever it was previously assigned to and
assign it to the specified place.
A request has been made to delete all entries in
a table. If CONFIRM is pressed, all entries will be
deassigned. The old data in the non-volatile RAM
will not be destroyed until the ENTER button is
pressed, and the table itself can be
reprogrammed as desired before the ENTER
button is used.
o-096-21 2-NA
Page 21