Mitel SX-200 Documentation page 98

SECTION MITL91 05/9110-096-l 05NA
ATTENDANT STATION
Page 44
BUSY-OUT
Description
This feature allows the Attendant to busy out any extension (the
extension cannot originate or receive any calls), and
busy-out condition. If the Attendant dials the number of a busied-out
extension, the console will display the extension number and '00" in
the Destination display, the ERR lamp is lit, the busy lamp field shows
the extension is busy, and the Attendant will receive reorder tone. The
Attendant may display all extensions that have been busied-out on the
console busy lamp field (see Locked-Out Display).
Conditions
If the extension is idle or Handsfree Idle when the Attendant dials
l
the busy-out code, the extension will be busied-out immediately.
If the extension is engaged when the Attendant dials
l
out code, the extension is busied-out as soon as the extension
becomes idle or Handsfree Idle. If the extension has 'Call For-
warding - Busy" or "Call Forwarding - Follow Me" set up, the
forwarding will occur.
If an extension has Call Forwarding in effect, and the extension
l
forwarded to has been busied-out, the calling extension receives
reorder tone.
If the extension is a member of a hunt group, all calls to the hunt
l
group will bypass
Assign an access code to Feature Number 18 (Attendant Func-
l
tion), usually * as indicated under Operation.
Programming
Select System Option 122 (Attendant Station Busy-Out Enable).
l
Operation
To busy out an extension:
Dial ~12.
l
Dial the extension number, and X.
l
Press the RELEASE
l
To remove the Busy-Out Condition on an extension:
Dial ~12, the extension number, and #.
l
Press the RELEASE button - the busy-out condition is removed.
l
the busied-out extension.
button
to
remove the
the busy-