Mitel SX-200 Documentation page 30

SECTION MITL9105/9110-096-l OO-NA
. .
Page 24
Groups, the duration will always be 8 s or less.
To specify the recording and delay time for an Agent Group:
Dial ~243
Dial Agent Group access code
Dial 1
Dial Recording Group access code
Dial time delay, in 2-digit seconds
Press RELEASE to terminate.
To review a recording assignment, the console dials:
Dial ~244
Dial Agent Group access code
Dial 1
Press RELEASE to terminate.
l
To delete all data associated with an Agent Group (Recording Group
and delay time assignments):
Dial ~243
Dial Agent Group access code number
Press RELEASE to terminate.
DID Intercept
5.07 DID Trunk calls to vacant or illegal numbers may be diverted to
a Recording Group. To define which Recording Group a DID
Intercept will be routed to:
Dial ~233
Dial Recording Group access code
Press RELEASE to terminate.
To delete an existing DID Intercept recording, the console should dial #
in place of the Recording Group access code.
5.08 If a DID Intercept Recording Group has been programmed and
the trunk has called a vacant or illegal number, then the trunk
will be routed to the recording. At the termination of the recording the
trunk will either be dropped or routed to the attendant (System Option
135) as a DID Intercept.
Automatic Wake-Up
5.09 An extension receiving an Automatic Wake-Up alarm call may
be diverted to a recording group upon answering. If an Auto-
ing device is available, then a room receiving a wake-up will be routed
to the recording upon answering. At the termination of the recording 'Ye.
the room will receive reorder tone.