Mitel SX-200 Documentation page 656

SECTION MITL9105/911 O-096-450-NA
Actual format details for the purpose of processing a Compact
Traffic Report are contained in the following Tables:
(a)
Table 3-2 details the Header format. This header is the same for
the Compact and Standard Reports.
: ;
Q
(b)
Table 3-3 details the format for the traffic register details.
@I
Table 3-4 shows the Header format when an Invalid Compact
Report is output. The header is the same for the Invalid Stan-
dard Report. However it should be noted that only the header
appears for an Invalid Standard Report.
Invalid Output Format
3.12
If a power failure occurs during a traffic hour, the registers are
zeroed. A special header's record is sent so that the user can
disregard that hour's data. An example of an Invalid Compact Report is
shown in Table 3-5. An Invalid Standard Report is identical to that for
an Invalid Compact Report, except that only the header is printed out.
3.13 After a restart, the time on the console will be "0O:OO" and will
flash to say that it is not valid. If traffic is polled, the current
time will be "0O:OO".
.A:,
$4
:. .,..
_:_.
Page 13