Mitel SX-200 Documentation page 229

Superswitch electronic private automatic branch exchange epabx

Hide thumbs Also See for SX-200:

Table of Contents

SECTION MITL91 05/911 O-096-10%NA

LINE LOCKOUT

The Attendant may be alerted that an extension has gone off-hook and

timed-out (not dialed within a certain period), by the console tone

ringing and the minor (MIN) alarm LED flashing. Upon pressing the

ALARM RESET button, the SOURCE display shows E099 and the equip-

ment number. The DESTINATION display shows the extension number

and LO for locked out (see also Automatic Station Release).

A handsfree station cannot be locked out.

Select System Option 115 (Attendant Lockout Alarm Enable).

Assign an access code to Feature Number 18 (Attendant Func-

tion), usually x as indicated under Operation.

Console tone ringer rings and minor (MIN) alarm LED flashes.

Attendant presses the ALARM RESET button - SOURCE and DES-

TINATION displays display information.

Once the problem has been corrected, the Attendant may cancel (1

the error by dialing *8# (where x is the Attendant Function) and

pressing the RELEASE button.

Chapters

Table of Contents