Mitel SX-200 Documentation page 575

SECTION MITL91 OS/91 1 O-096-220-NA
Table
Number
1
2
3
4
6
7
9
TABLE 2-l
SPEED CALL ACCESS NUMBERS
COMMON-USE TABLES
Speed Call Entry
Access Number Range
10-14
15-19
20-24
25-29
30-34
35-39
40-44
45-49
50-54
Personal Speed Call Access
2.13 The groups of speed call e.;rtry access numbers are the same
for personal table users as those for common-use tables. Dis-
tinctions between the use. of these two groups of speed call entry
access numbers are listed below:
Speed call entry access nmbers for personal tables are se-
lected and are programmed when the table is assigned to an
extension (Section MITL91059 11 O-996-21 0-NA).
Speed call entry access numbers are not predefined on a one-
to-one basis with a table, as is the case for common-use
tables (Table 2-l). See the mica1 example in Figure 2-1, which
shows that Access Number range lo-14 is fixed for Table 1, but
the same range is programmed for Table 11 when it is a per-
sonal table.
2.14 Other points with regard ?c personal table speed call entry
access numbers are as follows:
Two or more personal tab&es assigned to one station cannot
have the same group of access numbers.
More than one station may have the same group of speed call
entry access numbers, because each personal table is unique to
that station.
A speed call entry access number range, programmed for a
personal table, precludes thz user from accessing a common-
use table bearing the same number range even if the COS
options would allow it.
Tabk Speed Call Entry
Number Access Number Range
10
11
12
13
14
15
16
17
78
I
55-59
60-64
65-69
70-74
75-79
80-84
85-89
95-99