Mitel SX-200 Documentation page 133

Operation
To Park a call:
Flash the switchhook - dial tone returned.
l
Dial the assigned Call Park access code - dial tone returned.
l
Replace the handset, or access the paging equipment and make
l
an announcement, then replace handset.
To retrieve the Parked call at the Parking extension:
Lift the handset - you are connected to the call.
l
To retrieve the Parked call from a different extension:
Lift the handset, dial the Directed Call Pickup or Call Park code,
l
then dial the extension number at which the call was parked -
you are connected to the call.
Note: This feature is not applicable to the SUPERSET
SECTION MITL9105/911
sets.
O-096-1 05NA
Page 79