Mitel SX-200 Documentation page 277

SECTION MITL9105/9110-096-105-NA
SELECTION
RECEIVER DIRECT
Page 222
Description
For maintenance purposes a specific receiver may be selected and
tested from the test line.
Conditions
The receiver must be idle.
l
Programming
Assign an access code to Feature Number 19 (Maintenance
l
Function).
Operation
At the Tone Control card:
Set the top two thumbwheel switches to the desired receiver
l
circuit number. Set the two bottom switches to the desired
speech path. If the bottom two switches are set to 99, any free
speech path will be selected.
At the test line:
When the test line goes off-hook, it will seize the selected
l
receiver and speech path.
See Receiver Busy-Out and Section MlTL9105/91
eral Maintenance Information.
Gen-