Mitel SX-200 Documentation page 647

SECTION MITL9105/91 lo-096-450-NA
TABLE 2-l (CONT'D)
TRAFFIC REGISTER LISTING AND DESCRIPTION
Reg.
No.
Description
013 Console 1 Busy Usage. This register records the length of time during the hour for
which the console was in use. "In use" means the attendant was dialing or had a
Source or Destination or both. It does not include any time for which the attendant
had a call on hold.
014 Dial 0 Peg Count. This register increments every time the attendant answers a
"Dial 0" call. It includes Intercepts, for which a separate count is maintained. It also
includes Manual Lines and Contact Monitors.
015
016
LDN 2 Peg Count. This register is incremented for each Incoming LDN 2 call an-
swered by the attendant.
Console 2 Busy Usage. This register records the length of time during the hour for
which the console was in use. "In use" means the attendant was dialing or had a
Source or Destination or both. It does not include any time for which the attendant
had a call on hold.
017 Recall Peg Count. This register is incremented for each Recall answered by the
attendant. This includes Serial and Callback Recalls.
018
019
020
021
LDN 3 Peg Count This register is incremented for each Incoming LDN 3 call an-
swered by the attendant.
Attendant-Originated Calls Peg Count. This register is incremented each time the
attendant makes a call, whether the attendant has a Source or not. It is incre-
mented even if the attendant receives Busy or Reorder Tone.
Intercept Peg Count. This count is incremented for each Intercept answered by the
attendant.
LDN 4 Peg Count. This register is incremented for each Incoming LDN 4 call an-
swered by the attendant.
B - FEATURES
022
023
024
025
026
027
028
Spare Register
Spare Register
Spare Register
TAFAS Peg Count. This register is incremented when a TAFAS code is dialed, even
when busy tone is received.
Override Peg Count This register is incremented whenever an extension dials the
Executive Busy Override code or the attendant presses the OVERRIDE button. It only
increments when the override is completed.
Call Pickup Peg Count. This register is incremented whenever one of the Dial or
Directed Call Pickup codes is legally dialed.
Maid in Room Peg Count. This register is incremented whenever the Maid Room
status is updated.
Page 4