Mitel SX-200 Documentation page 374

O R
The busy SUPERSET 4 SWAP CAMP-ON feature is selected and
l
the calling party is connected.
O R
The busy SUPERSET 4 CALL FWD feature is selected, and the
l
calling party is diverted to the Call Forwarding destination.
To Answer a Camp-On Call:
Camp-On tone is heard, and the SWAP CAMP-ON feature name
l
is displayed.
CALL FWD feature name is displayed for 10 seconds if a Call
l
Forwarding destination (extension) has been programmed, and if
that extension is not busy.
Inform your current called party and press the SWAP CAMP-ON
l
feature button. The current call is held, and the camped-on call
is connected to the SUPERSET set.
O R
Press the CALL FWD feature button. The camped-on call is con-
l
nected to the Call Forwarding extension.
To return to the original caller (if SWAP CAMP-ON was selected),
press the CANCEL feature button.
To identify the camped-on party before answering, press the
l
display then SWAP CAMP-ON feature buttons. If required, press
the EXIT then the SWAP CAMP-ON or the CALL FWD feature
buttons to answer the call.
SECT I ON MITL9105/91
Page 13