Mitel SX-200 Documentation page 194

DO NOT DfSTURB DISPLAY
Description
This feature allows the Attendant to display all extensions that have Do
Not Disturb set. When the Attendant presses and holds the DO NOT
DSTB button (while the console is idle), the busy lamp field goes dark,
leaving only the lamps lit for the rooms that have Do Not Disturb
active. In addition, the SOURCE display shows the total number of
extensions with a Busy Lamp assigned and Do Not Disturb set.
Conditions
The console must be idle. If the console has an extension as its
l
SOURCE or DESTINATION party, or if the Attendant is using the
GUEST ROOM button, the Do Not Disturb status for that exten-
sion will be changed.
For an extension to be included in the SOURCE display, the
l
extension must have a busy lamp assigned to it.
Programming
Select System Option 187 (Do Not Disturb Enable).
l
Select System Option52 (Attendant Do Not Disturb and Mes-
l
sage Waiting Display Entie).
Operation
Press the DO NOT DSTB button - the busy lamp field changes to
l
display only the extensions that have Do Not Disturb active; the
SOURCE display shows the total number of extensions that have
Do Not Disturb set.
Release the DO NOT DSTB button - the busy lamp field returns
l
to normal.
SECTION MITL9105/9i
Page 139