Mitel SX-200 Documentation page 264

PAGING ACCESS (EXTENSIONS)
Description
An extension equipped with this feature is permitted access to the
system paging equipment by dialing the required access code. Access
may be restricted to Zone 1 only, Zone 2 only, or to both Zones 1 and
2, depending upon the access code dialed. If an extension tries to
access busy paging equipment, busy tone is returned.
Conditions
A maximum of two paging circuits are provided.
Camp-On or Automatic Callback - Busy may not be activated on
busy paging equipment.
Any extension paging announcement may be overridden by the
Attendant.
Paging amplifiers and loudspeakers are customer-provided
equipment.
A dry relay control is provided for amplifier control purposes for
each zone. (See MITL9105/9
ing and Installation.)
If the Attendant overrides an extension, the extension will re-
ceive busy tone.
Programming
Option Number 53 (Paging Access) must be included in the COS
l
of the extension.
Assign an access code to the paging access required:
l
Pager 2 - Feature Number 11
Pagers 1 and 2 - Feature Number 13.
Operation
Dial the required paging access code - after the short pulse of
l
tone is heard, you are connected to the paging system and may
make the required announcement.
SECTION MITL9105/9110-096-105-NA
11 O-096-200-NA, Shipping, Receiv-
Page 209