Mitel SX-200 Documentation page 110

SECTION MITL91 OS/91 1 O-096-105NA
Page 56
routed to:
Dial ~234.
l
Dial Recording Group Access code.
l
Press RELEASE to terminate.
l
To delete an existing Automatic Wake-up recording:
Dial x234.
l
Dial #.
l
Press RELEASE to terminate.
l
To set or modify a Wake-up call from the console:
Press the GUEST ROOM button - the GUEST ROOM lamp lights.
l
Dial the extension number - the DESTINATION display shows the
l
wake-up time.
Dial X, the Wake-Up time, the ft (or x if PM and a 12-hour clock
l
is used) - the DESTINATION display shows the WAKE-UP time.
Press the RELEASE button, or to return to the extension you may
l
press the GUEST ROOM button to return to the source party.
To cancel a Wake-Up call from the console:
Press the GUEST ROOM button - the GUEST ROOM lamp lights.
l
Dial the extension number - the DESTINATION display shows the
l
Wake-Up time.
Dial X# - DESTINATION display clears.
l
Press the RELEASE button, or GUEST ROOM button to return to
l
the source party.
To set or modify a Wake-Up call from an extension:
Dial the access code and desired Wake-Up time as a 4-digit
l
number using the 24-hour clock - dial tone is returned.
To cancel a Wake-Up call from an extension:
Dial the access code, followed by 9999 - dial tone is returned.
l
After three wake-up attempts, a minor alarm will appear at the
l
console. The SOURCE display will show E088 and the equipment
number. The DESTINATION display will show the extension num-
ber and nA.
Should the printer be suspended (*I&) for an extended period
l
of time, the print buffer may fill up. If the print buffer fills up, a
minor alarm will be raised, SOURCE display will show E098 and .
the DESTINATION display will show Prntr.