Mitel SX-200 Documentation page 73

Dial the Speed Call Table number for the particular external party
l
required.
Press the RELEASE button.
l
Note: If an external Call Forwarding number has already been set up
letters ECF on the DESTINATION display, after dialing ~11 plus
the forwarding extension number.
To review Call Forwarding for an extension:
Dial ~11, followed by the number of the extension.
l
dialed, followed by the Call Forwarding type. The DESTINA-
TION display shows the extension number to which the calls
are to be forwarded.
Press the RELEASE button.
l
To cancel Call Forwarding for a single extension:
Dial ~11, followed by the extension number.
l
Dial #.
l
Press the RELEASE button.
l
To cancel Call Forwarding for all extensions:
Dial X11.
l
Dial #.
l
Press the RELEASE button.
l
SECT I ON MITL9105/9110-096-105-NA
Page 1 9