Mitel SX-200 Documentation page 385

SECTION MITL91 OS/91
Page 24
10-096-l 07-NA
message in effect sees the message displayed.
To Cancel an Advisory Message:
Repeat procedure for activating a message, except press the OFF
l
feature button.
To Receive an Advisory Message:
When a SUPERSET set with a message in effect is rung from
l
another SUPERSET set, the calling SUPERSET set displays the
number dialed, then the display gives the message. The other
actions such as ringing or busy continue as normal.
To Send a Message Requesting a Callback:
If the number dialed (another SUPERSET set) is busy or isn't
l
answered, press the SEND MSG feature button. The message, in
the format described above, is sent to the called party, whose
set then displays the flashing word MSG.
To Receive a Message Requesting a Callback:
A message requesting a callback is indicated on the receiving
l
set by the word MSG flashing on and off.
If the receiving SUPERSET .set is idle, the message can be read
l
as follows:
Press the MSG feature button. The display indicates the num-
ber of messages to be read.
played.
If there are more messages to be read, the NEXT prompt is
activated. To read additional messages, press the NEXT fea-
ture button.
To clear a message once it has been' read, press the CANCEL
feature button.
To respond to the request, press the CALL feature button, and
the returned call is made automatically.
during a call, proceed as follows:
Press the SELECT feature button.
Dial '4' (feature number 4 is message (4:MSG)).
played.
If there are more messages to be read, the NEXT prompt is
activated. To read additional messages, press the NEXT fea-
ture button.
feature button.