Mitel SX-200 Documentation page 112

SECTION MITL9105/9110-096-105-NA
BOTH MODE STANDARD
Page 58
Description
When selected, this option causes the Attendant to be normally con-
nected to both the Source and Destination parties on all calls through
the console. Manual splitting may still be achieved using the console
SOURCE and DEST buttons. If this option is not selected, the Attendant
will be
connected to the Source party on answering the call, and to the
Destination party as soon as the destination number is dialed
(Automatic Split Mode). See also Both Button Enable.
Conditions
When this option is in effect, the console displays reflect the
l
status of the destination Pam/
Waiting.
Programming
Select System Option 102 (Both Mode Standard).
l
Operation
None
for Do Not Disturb and Message