Mitel SX-200 Documentation page 268

PRINTER AND RECORDING DEVICES
WARNING: THE PRINTER IS OUT-OF-SERVICE AND SYSTEM OP-
Description
The system may output data to a printer or recording device. This
allows the hotel Attendant to print information (such as the number of
local call units charged to a hotel room). An installer may write cus-
tomer data to a storage device like a cassette tape for backup. See
Automatic Wake-Up (Alarm Call), Message Register Print, Room Audit
and Traffic Measurement, Customer Data Dump & Load and Customer
Data Print.
Conditions
The printer must meet EIA RS-232 requirements.
l
The printer must have a minimum line length of 80 characters.
l
The printer must be capable of either 300 or 1200 baud, odd,
l
even or no parity, full duplex
The system can also operate into a modem for remote transmis-
l
sion.
Programming
Assign an access code to Feature Number 18 (Attendant Func-
l
tion), usually x as indicated under Operation.
If "purge or ignore output" is to be used, select System Option
l
If additional time is required for the carriage return on the printer
l
incorporated, select System Option 313 (Printer Carriage Return
Delay).
Select System Option 118 (Attendant Printer
l
Operation
From the console:
To suspend the output (for example, to change paper):
D i a l
l
Press the RELEASE button.
l
ERATION MAY BE AFFECTED.
To re-enable the output:
Dial 314~
l
Press the RELEASE button.
l
To purge and ignore the output (if the printer is-out-of-service):
Dial ~1400.
l
Press the RELEASE button.
l
Control Enable).
Page 213