Mitel SX-200 Documentation page 310

Press the RELEASE button.
l
Press PROGRAM.
l
Press the desired Speed Call key.
l
Dial the SUPERSET 4 number to be accessed, followed by x5.
l
Press SAVE.
l
Press EXIT.
l
To access an intercom number from a SUPERSET 4 set:
Press the appropriate Line key - the SUPERSET 4 set will be
l
connected as an intercom call to the SUPERSET 4 set's speaker
or the Call Announce pair if the SUPERSET 4 set is busy.
Note: The caller will hear only one short ringback tone and the called
party receives only a short warning tone. If the called SUPER-
SET set does not have an Announce Pair and it is busy the
caller will receive busy tone.
To access an intercom number from a standard extension:
Go off-hook - dial tone returned.
l
Dial the appropriate intercom number - the user will be con-
l
nected as an intercom call to the SUPERSET 4 set's speaker or
the Call Announce pair if the SUPERSET 4 set is busy.
Note: The caller will hear only one short ringback tone and the called
party receives only a short warning tone. If the called SUPER-
SET set does not have an Announce Pair and it is busy the
caller will receive busy tone.
SECTION MlTL9105/911 O-096-1 05-NA
Page 255