Mitel SX-200 Documentation page 315

Superswitch electronic private automatic branch exchange epabx

Hide thumbs Also See for SX-200:

Table of Contents

SECTION MITL9105/9110-096-105-NA

The test line (Equipment Number 001) is hardwired to the test termi-

nals on the maintenance panel. This line, in addition to normal exten-

sion facilities, has access to special features used for maintenance and

testing. These exclusive features allow the service personnel to:

Directly access an extension

Directly access a trunk

Set and clear busy-out condition of speech paths and receivers

Clear all busy-out conditions except trunks

Clear all errors .

Select a specific speech path and receiver for use, and display

their status

Initialize the hardware status of circuit cards

Reset the system

Reserve the printer for dump

Suspend the printout

Enable the printout

Ignore the printout.

Card position 1 must contain a Line card.

Assign an unrestricted COS to Equipment Number 001.

The operation of the Test Line is detailed in Section MITL9105/

91 IO-096-500-NA,

General Maintenance Information.

Chapters

Table of Contents