Mitel SX-200 Documentation page 80

SECTION MITL9105/9110-096-105-NA
ATTENDANT CO TRUNK - CO TRUNK CONNECT ENABLE
Page 26
Description
Selection of this option allows the Attendant to connect a CO trunk
call to another CO trunk, then release the call from the console. See
End-of-Dial Signal for Outgoing Trunks.
Conditions
Two or more trunks may be connected in a Attendant-Controlled
l
Conference.
At least one of the trunks in the connection must provide release
supervision or the trunk connection will not automatically re-
lease from the system when the call is completed. (Note that you
cannot connect two loop start trunks.)
Programming
Select System Option 107 (Attendant CO Trunk - CO Trunk Con-
l
nect Enable).
System Option 107 may be selected in conjunction with System
Options 108 (Atsdant CO Trunk - Non-CO Trunk Connect En-
able) and 109 (Attendant Non-CO Trunk - Non-CO Trunk Con-
nect Enable).
Operation
After answering an incoming trunk call, or establishing an outgoing
trunk call:
Dial the trunk group access code of the required outgoing CO
l
trunk
Dial the required CO number.
l
Wait for the called party to answer.
l
gether.
I