Mitel SX-200 Documentation page 93

Superswitch electronic private automatic branch exchange epabx

Hide thumbs Also See for SX-200:

Table of Contents

The Attendant may test all the console LEDs, 7-segment displays and

tone ringer on the console by pressing the LAMP TEST button.

If the LAMP TEST button is pressed and the BELL OFF button has

been enabled, the console tone ringer will still be rung.

Press the LAMP TEST button and hold down.

Either the console 7-segment displays will show figure 8s or

all console LEDs are lit with the ringer sounding. Pressing the

In the latest version console, pressing the LAMP

for more than 5 s will lock the console in this condition until

either another button is pressed, or a call arrives at the con-

SECTION MITL9105/9110-096-l

TEST button repeatedly will toggle between the two

Chapters

Table of Contents