Mitel SX-200 Documentation page 329

TRUNK GROUPS
. .
Page 274
Description
This feature controls extension access to selected Trunk Groups. An
extension has access to all trunk groups specified in its COS by dialing
the assigned access code. See Trunk Groups - Hunting - Two Types.
Conditions
A maximum of 12 individual trunk groups are available.
l
A trunk may only be a member of one trunk group.
l
All trunks within a trunk group must be of the same type.
l
An overflow trunk group should contain trunks of the same type
l
as the overflowing trunk group.
Trunks must be programmed before trunk groups.
l
Programming
Assign required trunk group types, access codes, toll denial and
l
overflow information for each trunk group. (See Section
The COS of the extension must contain the option numbers of
l
the trunk groups (Option Numbers 65-76) to which access is
allowed. (See Section MITL9105/9 11 o-096-21 0-NA, System Pro-
gramming.)
If the extension is not permitted to overflow from one trunk
l
group to another, the COS of the extension must contain Option
Number 52 (Do Not Overflow).
Operation
None