Mitel SX-200 Documentation page 37

Feature
8.04 There are six feature buttons. Each button is associated with a
specific feature. The user selects the feature or action, by
pressing the appropriate feature button.
Supplementary
Speaker on/off. This button allows the set user to receive or
8.05
originate calls without use of the handset. Pressing the button
once switches the speaker and microphone on and selects the prime
line. Each time this button is pressed, the speaker and microphone are
switched alternately on and off, and the set is switched between on-
and off-hook conditions.
8.06 Mic mute. This button is used to switch the microphone off
during handsfree operation, in order to either prevent transmis-
sion of local sound, or improve reception when the set is installed in a
noisy environment.
8.07 SWAP. The SWAP key allows the user to effect a broker's call
between two calls.
8.08
.
dial a new number and conference the call or transfer the Calf
on Hold to the new number.
REDIAL. This key when pressed automatically redials the last
8.09
manually dialed trunk call.
CANCEL. This key cancels any dial action performed at the
8.10
8.11 PROGRAM/SAVE. This key allows the user to program and save
Speed Dial numbers at specified Speed Dial key locations.
9. SUPERSET 4 Set
General
The SUPERSET 4 set provides:
9.01
(a) Visual features, visual line or trunk status indication by means
of LCD symbols adjacent to each line select button.
16-character
(provided by PABX), digit echoing, speed call number, call for-
ward destination number, timed-reminder setting, caller iden-
tification, and messages from the system.
Displayed word prompts signifying all valid call-handling op-
tions at any given time.
(b) Operational
SECTION MITL9105/9110-096-l OO-NA
Buttons
Feature Buttons
This key allows the user to put a Call on Hold,
3 set.
alphanumeric
features
display for time-of-day and date
Page 31