Mitel SX-200 Documentation page 555

SECTION MITL9105/9110-096-213-NA
COS Option 116, ARS Limited Access. This Option, when en- (I'-
caller's COS.
COS Option 118, ARS Most Expensive Route Warning Tone.
This Option, when enabled, provides an audible tone indication
to the SUPERSET 3 set and standard telephones and a visual
note (EXPENSIVE ROUTE) to the SUPERSET 4 users when the
last ARS route is used.
Feature Access Code 44, ARS Access Code. This Feature Ac-
feature
Note: The last number redial feature of Speed Call cannot be used
with ARS.
ARS Parameters
7.03 As previously mentioned, the number of g-Entry Tables is de-
pendent upon the number of 800-Entry Tables selected. The
total availabilrty of tables required should be carefully determined by
the use of Traffic Measurement (Section MITL9705/91
Programming Forms
7.04 The Installation Forms (which are included as part of Volume 3)
are as follows:
Table Ouantity
l
Area Code Table Programming
Area Code/Office Codes Programming
l
Modify Digits Table Pr.ogramming
Route Table Programming.
l
Programming Procedures
7.05 The System Options, COS Options and ARS Feature Access
Code are entered in the Standard Programming Code. This pro-
gramming is described in Section MlTL9105/91
Programming. When all Standard programming is completed, the ARS
Feature {and the Multi-Digit Toll Control and Speed Call Features if
applicable) is programmed in the Extended Programming Mode.
7.06 The Extended Programming Mode has several submodes. as
follows:
Automatic Wake-Up
l
Toll Control
l
System