Mitel SX-200 Documentation page 199

SECTION MITL91 OS/91
END-OF-DIAL SIGNAL ON OUTGOING TRUNKS
. .
Page 144
10-096-l OS-NA
Description
This option, if selected, allows the Attendant or extension to access a
trunk, dial the required directory number, then complete the caPP
internal extension without delay, by pressing the # button to stop
digits being passed to the trunk Digits dialed after the 8 will be
interpreted by the PBX system as a new number (i.e., an extension).
Conditions
When this option is not included, digits dialed by the Attendant
l
will be passed to the trunk until one of the following occurs:
answer supervision is received, a 10 second interdigit pause in
dialing occurs or the Attendant puts the trunk on hold.
This option is only available to DTMF extensions.
l
Programming
Select System
l
Trunks).
Operation
From the console:
Dial the required trunk group access code. '
l
Dial the required external directory number - ringing tone is
l
returned.
Press the # button.
l
Dial the required extension number or trunk
l
Press the RELEASE button - the called extension is connected to
l
the outside directory number.
From an extension:
Dial the required trunk group access code.
l
Dial the required external directory number.
l
Dial #.
l
Dial the required extension number or trunk number.
l
Option 134 (End-of-Dial
to an
Signal for Outgoing