Mitel SX-200 Documentation page 85

ATTENDANT-CONTROLLED CONFERENCE
Description
This feature allows the Attendant to set up a conference with up to six
conferees plus the Attendant. The conferees may be any combination
of extensions and trunks. To set up a conference, the Attendant must
have a completed Source and/or a Destination call. If only one party is
in the conference it will hear music, if provided. Each time the Atten-
dant enters the conference, all parties in the conference hear a warn-
ing tone. The Attendant may re-enter the conference or be recalled to
the conference, by an extension switchhook flash, at any time.
Conditions
Parties may be added to the conference by the Attendant only.
l
If a single tenant is selected, only one conference may be active
l
at a time.
If two or more trunks are to be connected to the conference, the
required trunk-to-trunk parameters must be selected.
The conference must not contain trunks for which automatic
release supervision is not provided.
If the conference contains only a single party for more than 1
minute, the party recalls to the Attendant as a RECALL, and the
conference is terminated.
A handsfree station(s) may not be left in a conference without a
normal telephone set being in conference.
Two loop start trunks cannot be in a conference at the same
time.
Two handsfree stations cannot be in a conference at the same
time.
Programming
Select System Option lJL(Attendant Conference).
l
Select the required Trunk-to-Trunk Connect System Options -
l
System Option Numbers 107 (Attendant CO Trunk - CO Trunk
Connect Enable), 108 (Attendant CO Trunk - Non-CO Trunk Con-
nect Enable), and 109 (Attendant Non-CO Trunk - Non- CO Trunk
Connect Enable).
Operation
After establishing a Source, Destination or both:
Press the CONF button - the CONF lamp lights, the SOURCE
l
display clears and the DESTINATION display shows C.
Press the RELEASE button.
l
Dial the number of the next party - when the party answers.
l
Press the CONF button - you and the called party are connected
l
to the conference.
Press the RELEASE button - the called party remains in the
l
conference; the console is released and becomes idle.
SECTION MITL9105/9110-096-105~NA
Page 31