Mitel SX-200 Documentation page 624

SECTION MITL91 OS/91 1 o-096-31 5-NA
..-:.
TABLE 5-3
ATTENDANT FUNCTION ACCESS CODES
These codes assume the use of x as the Attendant Function code (Feature Number 18). For
Attendant Function codes used in Traffic Measurement, see Section MITL9105/91 lo-096-450-NA.
To cancel all call forwarding:
a) Dial ~1, or ~11
b) Dial ##
c) Press RELEASE button.
To access an individual trunk:
a) Dial ~20
b) Dial individual trunk access number
(equipment number)
c) Dial x
d) Press RELEASE button.
To make Trunk Group extension and atten-
dant access:
a) Dial ~6
b) Dial Trunk Group (1 through 10)
c) Dial #
d) Press RELEASE button.
To change the Direct Inward System Access
Code:
a) Dial ~7
b) Dial DISA code
c) Press RELEASE button.
To force-release an individual trunk:
a) Dial ~20
b) Dial individual trunk access number
(equipment number)
c) Dial ##
d) Press RELEASE button.
To cancel a minor alarm (see Note 1):
a) Dial ~8
b) Dial #
c) Press RELEASE button.
To make flexible night service assignments
(see Note 3):
a) Dial ~3
b) Dial individual trunk access number
(equipment number)
c) Press NIGHT 1 or NIGHT 2
d) Dial extension number
e) Press RELEASE button.
To cancel all system callbacks:
a) Dial %I
b) Dial #
c) Press RELEASE button.
To busy out an individual trunk (see Note 3):
a) Dial x9
b) Dial individual access number
(equipment number)
c) Dial x
d) Press RELEASE button.
To de-busy an individual trunk (see Note 3):
a) Dial x9
b) Dial individual trunk access number
(equipment number)
c) Dial #
d) Press RELEASE button.
To set the clock time:
a) Dial ~5
b) Dial time (2-digit hours, plus 2-digit
minutes)
c) Dial * for PM, otherwise AM
d) Press RELEASE button.
To make Trunk Group attendant access only:
a) Dial ~6
b) Dial Trunk Group (1 through 10)
c) Dial JC
d) Press RELEASE button.
To change the status of all occupied clean
rooms to occupied and needs cleaning:
a) Dial ~10
b) Dial JC
c) Press RELEASE button.
To change the status of all occupied rooms
in the need of cleaning to occupied clean:
a) Dial ~10
b) Dial #
c) Press RELEASE button.
Page 23