Mitel SX-200 Documentation page 72

SECTION MITL9105/9110-096-105-NA
ATTENDANT CALL FORWARD SETUP AND CANCEL
Page 48
Description
This feature allows the Attendant to set up, review and cancel Call
Forwarding for any extension. (The extension for which the Attendant
sets up forwarding need not have any of the Call Forwarding features
in its COS.) The Attendant may also set up Call Forwarding from the
extension to the Attendant.
Conditions
The extension to which the calls are forwarded must not have
l
Option Number 38 (Never a Forwardee) in its COS.
The Attendant can only set up a forwarding type for which a
l
feature access code has previously been assigned (Features 3, 4,
5 and 46).
It is not possible to set up or cancel Call Forwarding for an
l
extension whose number begins with #.
Assign an access code to Feature 18 (Attendant Function); usu-
l
ally x as shown under Operation.
Programming
None
Operation
To set up Call Forwarding (to internal number):
Dial ~11 followed by the number of the forwarding extension.
l
Dial the Call Forwarding type digit:
l
1 = Call Forwarding - Busy
2 = Call Forwarding - Don't Answer
3 = Call Forwarding - Follow Me
4 = Call Forwarding - Busy/Don't Answer.
Dial the number of the extension to which the calls are to be
l
forwarded, or the access code of the Attendant (Feature Number
1) if the call is to be forwarded to the Attendant.
Press the RELEASE button.
l
To set up Call Forwarding (to external number):
Dial ~11, followed by number of forwarding party (see Note).
Dial the Call Forwarding type digit:
l
1 = Call Forwarding - Busy
2 = Call Forwarding - Don't Answer
3 = Call Forwarding - Follow Me
4 = Call Forwarding - Busy/Don't Answer.
Dial the Speed Call Feature Access Code.
l