Mitel SX-200 Documentation page 132

Superswitch electronic private automatic branch exchange epabx
Hide thumbs Also See for SX-200:
Table of Contents

Advertisement

SECTION MITL91 OS/91 1 O-096-1 05-NA
CALL PARK
Page 78
Description
This feature allows an extension user to park an active call and replace
the extension handset. The call may be retrieved at the extension at
which the call was parked, or at any remote extension within the
system. The parked party hears music while the call is parked, or
nothing if Music on Hold is not employed.
If a parked call is not retrieved within the selected recall time (2, 3 or 4
minutes), the parking extension is rung. If the parked call was a trunk
call and the extension does not answer the recall within the selected
recall time-out period (20, 30 or 40 seconds), the parked call will be
routed to the Attendant Console and will appear as a RECALL. If the
parked call was an internal call, the parking extension will continue to
ring until it is answered, or until the parked extension goes on-hook
Conditions
A parking extension cannot originate or answer calls while the
l
call is parked, but may access the paging equipment after dialing
the Call Park code.
The Attendant cannot park calls.
l
The selected Don't Answer recall time-out applies to Call Park
l
recall
time-out.
During Night Service a parked trunk call is not routed to the
l
Attendant but continues to ring at the parking extension.
System Option 169 (Trunk Recall Partial Inhibit) and Call Park are
l
mutually exclusive.
Programming
Assign an access code to Feature Number 6 (Call Park).
l
The COS of the extension must include Option Number 37 (Call
l
Park).
If remote pickup of the parked call is required, the extension's
l
COS must contain Option Number 39 (Directed Call Pickup).
minutes.
If System Option 211 is selected, the Call Park recall time is 4
l
minutes.
If neither Option 210 nor Option 211 is selected, the recall time
l
is 3 minutes (default time).
System Option l8J (Can Flash if Talking to an Incoming Trunk),
l
System Option 182 (Can Flash if Talking to an Outgoing Trunk)
and System Opt= 180 (Can Flash if Talking to an Extension)
must be enabled as required.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sx-100

Table of Contents