Mitel SX-200 Documentation page 384

C o n d i t i o n s
A message is canceled automatically if the sender and receiver
l
have a telephone conversation before the message is read.
Messages are canceled after 24 hours.
l
Systemwide messages can be created or altered only from a
l
4 set with the appropriate Class of Service.
O p e r a t i o n
To Set Up Advisory Messages:
Press the PROGRAM feature button.
l
Press the MSG feature button.
l
In response to display DIAL IN MSG. NUM., dial message number
l
(between 01 and 15 inclusive).
Selecting a message number in this group causes the exist-
ing message to be overwritten.
In response to display NOW ENTER MSG, dial in the message as
foilows:
Both number and alphacharacters can be used in a message.
l
Buttons 2 through 9 and SC on the keypad are identified with
alphacharacters. Press the button associated with the first
character in the message, and a character is displayed in the
alphanumeric display. If this character is not correct, re-
peated presses on the button, cycle the display through the
character for that button. When the displayed character is
correct, press the NEXT feature button.
Repeat the above step for remaining characters in the mes-
sage. For spaces, press the NEXT feature button again.
There are two ways to correct a programming error:
1 . Use the - feature button to backspace to and clear an
incorrect entry.
2 . To cancel the entire procedure before the message has
been saved, press the EXIT feature button.
When the message is complete, press the SAVE feature but-
ton. The message is now saved.
To Activate an Advisory Message:
Press the MSG feature button.
l
If displayed message is inappropriate, press the NEXT feature
l
button repeatedly to cycle through the repertoire of messages,
or dial message number (01 to 15) if known.
Press the ON feature button. The selected message is now effec-
l
tive. Any other SUPERSET user dialing a SUPERSET'set with a
SECT I ON MITL9105/9110-096-107-NA
Page 23