Mitel SX-200 Documentation page 333

SECT I ON MITL9105/911
T R U N K -T O -T R U N K C O N N E C T I O N S ( A T T E N D A N T )
. .
Page 278
D e s c r i p t i o n
This feature allows the Attendant to connect any two trunks together,
then release them from the console. The trunks involved may be CO
and/or Non-CO trunks depending on the system options selected.
C o n d i t i o n s
All trunks involved must provide release unless they are CO, in
l
which case, one of them must provide release supervision in
order to assure trunk release. Lack of release supervision will
result in trunks being "hung up".
P r o g r a m m i n g
If the Attendant is to be able to connect CO trunks to CO trunks,
l
select System Option 107 (Attendant CO Trunk - CO Trunk Con-
nect Enable).
If the Attendant is to be able to connect
l
trunks, select System Option 108 (Attendant CO Trunk - Non-CO
Trunk Connect Enable).
If the Attendant is to be able to connect Non-CO trunks to
l
Non-CO trunks, select System Option 109 (Attendant Non-CO
Trunk - Non-CO Trunk Connect Enable).
Any combination of the above System Options may be selected, t
l
providing complete flexibility.
O p e r a t i o n
Answer the incoming trunk call.
l
Dial the access code for the outgoing trunk group required.
l
Dial the required number.
l
When the called party answers, announce the call.
l
Press the RELEASE button.
l
trunks to Non-CO
CO