Mitel SX-200 Documentation page 151

CONTROLLED OUTGOING RESTRICTION SETUP
Description
If this feature is selected, the Attendant may restrict an extension from
making any outgoing trunk calls. The Attendant may also remove the
restriction. While the restriction is in force, any outgoing trunk call
from the extension is intercepted to the Attendant (Illegal Access
Intercept to the Attendant) or reorder tone. If this option, and System
Options 113 (GUEST ROOM Button Enable) and 119 (Attendant ROOM
STATUS Button Enable and Display Enable) are selected, outgoing re-
striction is automatically set when the room status is set to "l", Room
Vacant and ready to be occupied or "3" Room Vacant but not ready.
Conditions
Night Service 2 is not available.
l
Room Status Button and Controlled Outgoing Restriction are
l
mutually exclusive.
Programming
Select System Option 258 (Controlled Outgoing Restriction Setup
l
Enable).
Select System Option 113 (GUEST ROOM Button Enable) if Con-
l
trolled Outgoing Restriction is to be set up without ringing the
extensions.
If the restriction is to be set automatically when the Room
l
Status is set to 1 or 3, select System Option 119 (Attendant
ROOM STATUS Button Enable and Display Enable).
If calls are to be intercepted to the Attendant, select System
l
Option Number 136 (Intercept to Sup.-Illegal Access).
Operation
To set Controlled Outgoing Restriction:
Press the GUEST ROOM button.
l
Dial the required extension number.
l
Press the ROOM RESTR button - the ROOM RESTR lamp lights,
l
Controlled Outgoing Restriction is now in effect on the exten-
sion.
Press the RELEASE button.
l
To remove Controlled Outgoing Restriction:
Press the GUEST ROOM button.
l
Dial the required extension number - the ROOM RESTR lamp
l
lights.
SECTION MITL9105/9110-096-105-NA
Page 97