Mitel SX-200 Documentation page 738

:
-
::
SECTION MITL91 OS/91 1 O-096-500-NA
:.
. .
'.
3
\.-
ATT INT RCL MD M&N
souRcE
ATT RING BUSY ERR
DESTlNATlON
EO12 - UNABLE TO CONNECT A SPEECH PATH TO LINE CtRD N
I
04 - CARD POSITION 04 SHELF 1
031- EQUIPMENT NUMBER 31 (SHELF 1 CARD 04, UNlT 7)
024 - SPEECH PATH IN USE 024
xwso
Figure 4-8 Typical Error Display
as per Section MiTL!3105/91 IO-096-210-NA. Note that initialization will
destroy all RAM data and should only be performed during nontraffic
hours as the system will have to be totally programmed.
5. MAINTENANCE FUNCTlONS
A
General
5.01 The test line is the line on Equipment Number 001 and appears
both on the connector and on terminal posts on the main-
tenance panel. It must be programmed to be an extension and should
have full trunk access for use by maintenance personnel. The test line
has the ability to:
l
Directiy access a trunk or an extension
0
Initiate a date dump
0
Set and clear the busy-out conditions of speech paths and
receivers
Page 33