Mitel SX-200 Documentation page 302

STORE AND FORWARD
Description
This system option enables all dialed digits to be collected before a
trunk is seized. This eliminates double digits from appearing on SMDR
records where an ESS CO is used. The two ARS Dial 0 Time-out
System Options apply to Store and Forward.
Conditions
Wait for dial tone should be selected when programming the
l
Trunk Group Type.
Programming
Select System Option 171 (Store and Forward).
l
Select System Option 23 (ARS Dial 0 Time-out 5 Seconds) or
l
select System Option 241 (ARS Dial 0 Time-out 10 Seconds) to
enable the PBX system to differentiate between Dial 0 calls and
long distance Dial 0 calls.
Operation
Dial the required ARS access code - ARS dial tone returned.
l
Dial the required digits - all digits are stored until a delimiter (##)
l
or a Wait for Dial Tone occurs.
SECT I ON MITL9105/9110-096-105-NA
Page 247