Mitel SX-200 Documentation page 386

M U L T I C A L L L I N E A P P E A R A N C E
D e s c r i p t i o n
Multicall lines are similar to key lines. They are extension numbers of
single line sets, SUPERSET prime line or multicall lines. The user has
automatic call privacy on multicall lines. When someone is using a
multicall line, anyone else with a similar multicall line may access the
line and originate a call. If a multicall line is placed on hold, no one
else with an appearance can take the line off hold. A SUPERSET 4 set
may have several multicall lines, all other appearances of the line are
free when some are busy. Incoming calls may ring at the SUPERSET
set immediately, after a delay (10, 20, 30 or 40 seconds, set by the Call
Forward - Don't Answer Time-out system option), or not at all. The
multicall line can also be controlled in the direction of calling; i.e., you
can allow incoming calls only, outgoing calls only or both ways as
required.
C o n d i t i o n s
A multicall line can never be an appearance of a key line.
l
P r o g r a m m i n g
See the SUPERSET 4 Programming Form.
l
O p e r a t i o n
See the SUPERSET 4 User Guide.
l
SECT I ON MITL9105/9110-096-107-NA
Page 25