Mitel SX-200 Documentation page 113

BROKER'S CALL
Description
The Broker's Call allows an extension user, while engaged in a call, to
hold the first call and originate a new call. Once the new call has been
established, the originating extension may alternate between the calls,
and carry on a PRIVATE conversation with either party. If the extension
originating the Broker's Call hangs up with a party on hold, the exten-
sion will be rung back by the held party. (See also Transfer with
Privacy.)
Conditions
An extension with the Broker's Call feature may access the Call
l
Park, Call Hold, Call Hold and Retrieve, and Paging features after
flashing on a call.
The originating extension and only one of the other parties may
l
be in the talking connection at any time.
COS Option Number 48 (Broker's Call) and Option Number 49
l
(Station Conference) are mutually exclusive. COS Option 48
(Broker's Call) and Option Number 98 (Transfer with Privacy) are
mutually exclusive.
System Options 183 (Cannot Dial a Trunk after Flashing) and 184
l
(Cannot Dial a Trunk After Flashing if Holding or in Conference
with a Trunk) do not apply to an extension with Broker's Call.
Programming
The COS of the extension originating the Broker's Call must
l
contain Option Number 48 (Broker's Call).
One or more of the System Options 181 (Can Flash if Talking to
l
an Incoming Trunk), 182 (Can Flash if Talking to a Outgoing
Trunk) and 180 (Can Flash if Talking to a Station), must be
selected in conjunction with Broker's Call.
Operation
After establishing a call, flash the switchhook - transfer dial tone
l
is returned.
Dial the number of the second parry - when the second party
l
answers, 2-way private conversation.
To alternate between calls, flash the switchhook - private con-
l
versation with the other party.
SECTION MITL9105/9110-096-10%NA
Page 59