Mitel SX-200 Documentation page 380

Superswitch electronic private automatic branch exchange epabx
Hide thumbs Also See for SX-200:
Table of Contents

Advertisement

HANDSFREE OPERATION
Description
Handsfree operation allows a SUPERSET
or called patty by means of the set speaker and microphone. (The
handset is left on-hook.)
There are two differing modes of operation which are independently
selected as either auto-answer, or speaker on/off features.
The auto-answer feature, when selected, permits an incoming call to
the SUPERSET 4 extension (prime directory). number to be answered
automatically and connected to the SUPERSET speaker and micro-
phone. No action is necessary by the extension user. The caller re-
ceives 1 second of audible ringing tone and is then connected to the
extension. The extension user hears a single ring as an indication of
the incoming call. The station user can originate calls normally.
The speaker on/off feature allows a SUPERSET user to receive and
make calls without lifting the handset. This feature can be activated
during a call, or prior to making or answering a call, and can be used
on any of the lines appearing at the set. The SUPERSET
dial from keypad, or use speed call or redial features, without pre-
viously lifting the handset, selecting a line, or obtaining dial tone.
. .
Description
Call Forwarding - Don't Answer has no effect if the SUPERSET 4
l
set is operated in the Auto-Answer Mode.
A callback cannot be honored if the originating SUPERSET 4 set
l
is operated in the Auto-Answer Mode.
A Loop Trunk cannot call or be transferred to a SUPERSET set in
l
the Handsfree Mode.
Operation
To Operate a SUPERSET 4 set in the Auto-Answer Mode:
Press the SELECT feature button.
l
Dial '3' (feature number 3 is Auto-Answer (3:AUT0 ANS)).
l
Press the ON feature button. With the handset on-hook, any
l
incoming call to the SUPERSET
ringer once, and is then connected to the speaker and micro-
p h o n e .
On completion of the call, when the call hangs up, the SUPERSET
l
set is rung once and the line becomes idle.
To Disable the Auto-Answer Feature:
Press the SELECT feature button.
l
Dial '3'.
l
S
E C T I O N
4 user to speak with a caller
4 user can also
extension number rings the set

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sx-100

Table of Contents