Mitel SX-200 Documentation page 640

;;;:
ji/:
SECTION MITL9105/911 o-096-31 5-NA
I, :i;:.
. .
TABLE 7-l
TYPE OPTIONS
A TYPE (major)
0
1st digit: represents the line type for the key.
1 = PRIME KEY
2 = KEY LINE
3 = MULTIPLE CALL
4 = DIRECT TRUNK SELECT
5 = PRIVATE LINE
6 = PERSONAL OUTGOING LINE
B TYPE
0
2nd digit: represents the Direction Variant.
1 = BOTH WAY
2 = INCOMING ONLY
3 = OUTGOING ONLY
C TYPE
0
3rd digit: represents the Ring Variant.
1 = IMMEDIATE RING
2 = DELAYED RINGING
3
= NO RING
D TYPE
0
4th digit: represents the Secretarial Variant.
1 = NON-SECRETARIAL
2 = SECRETARIAL
7.57 CONFIRM:
This button is used in a number of circumstances to
confirm a requested action (usually an action that destroys
existing programmed information).
7.58 DELETE:
The DELETE button allows a deletion to be made to
existing data and to specify a toll-allowed (unrestricted) set.
7.59
NEXT: The NEXT button allows the program to be reviewed by
selecting the desired program, the desired starting point, then
pressing the NEXT button to review the program. Pressing the NEXT
button when the system initially enters the Standard Programming
mode will place the system in the Extended Programming mode.
Page 39
.