Mitel SX-200 Documentation page 368

. .
BROKER'S CALL
Description
The Broker's Call allows a SUPERSET 4 user, while engaged in a call, to
hold the first call and originate a new call. Once the new call has been
established, the originating extension may alternate between the calls,
and carry on a PRIVATE conversation with either patty. If the extension
originating the Broker's Call hangs up with a party on hold, the exten-
sion is rung back by the held party. (See also Station Transfer, Con-
sultation Hold/Add-On, Transfer with Privacy.)
Conditions
The originating extension and only one of the other parties may
l
be in conversation at any time.
Broker's Call takes preference over transfer with privacy.
l
Operation
After establishing a call, press the TRANSKONF
l
transfer dial tone is returned, and the original called party is
placed on hold.
Dial the number of the next party - when this party answers
l
there can be a Z-way private conversation.
If the dialed party is busy or doesn't answer, press the CANCEL
l
feature button - the original called party is now taken off hold.
To alternate between calls, press the SWAP feature button.
l
SECTION MITL9105/9110-096-107~NA
feature button -
Page 9