Mitel SX-200 Documentation page 282

RESET THE SYSTEM
Description
This feature allows the console or test line to reset the system (see
also Remote System Reset - Protection Override).
Conditions
The thumbwheel switches on the Tone Control card must be set
l
to WXY, where Y is any digit 0 to 9 and X is any digit except 7.
This is not necessary if System Option 166 (Remote System
Reset - Protection Override) has been selected.
Programming
Assign an access
l
(Maintenance Function).
Operation
(Where 555 is the Maintenance Function.)
From the console or test line:
Dial 555 + 6 - System reset.
l
Note: All Traffic Measurement (for the hour), SMDR (in buffers), Call-
backs, Call Forwarding, Time, and Date will be lost.
SECTION MITL9105/9110-096-105-NA
code (i.e., 555) to Feature Number 19
.
Page 227