Mitel SX-200 Documentation page 592

Superswitch electronic private automatic branch exchange epabx

Hide thumbs Also See for SX-200:

Table of Contents

6.07 If it is required to delete a saved number for any reason,

perform the following procedure:

Lift handset and listen for dial tone.

Dial Speed Call Feature access code.

Dial the Saved Number Entry Access number.

(e) Go on-hook

Toll Restriction/Toll Control

If the PABX was programmed to include Toll Control or Toll

Restriction features, it should be noted that numbers entered in

personal tables are subject to toll restriction or control, but those for

common-use tables do not have this restriction or control.

7. EXTERNAL CALL FORWARDING

An extension with Speed Call capability (common-use or per-

sonal) may have calls forwarded to an external number. This

allows an extension user to receive calls at home during "off-business

The attendant may set up External Call Forwarding (ECF) as per

Table 7-1. Note the following tables assume the use of * as the

Attendant Function code (Feature Number 18). The extension may set

up ECF as per Table 7-2. The attendant may check for ECF as per Table

7-3. The attendant may cancel individual ECF as per Table 7-4 or all

ECF in the system as per Table 7-5. The extension to have its calls

forwarded may cancel its ECF as per Table 7-6.

The ECF feature requires the minimum amount of System pro-

gramming. System Option 273 (External Call Forwarding Enable)

must be enabled. The extension being forwarded must have Speed Call

capability Personal or Common-Use (paragraphs 2.05 - 2.21). The ex-

tension or DISA trunk that will be forwarded as an ECF (after reaching

an extension with ECF in effect) must have Class-of-Service Option 97

in its COS. Note that it is not possible to have normal digits inserted in

an ECF (i.e., 4300).

SECTION MITL91 OS/91 lo-096~220~NA

Chapters

Table of Contents