Mitel SX-200 Documentation page 34

SECTION MITL91 OS/91
Page 28
10-096-l 00-NA
Speed call.
Automatic selection of primary line.
Pushbutton selection of nonprimary line.
Automatic ringing line selection (programmed option).
l
Hold function for any call at the SUPERSET set.
User programming of call forward destination number, speed
l
call entry.
Handsfree operation with switchable microphone.
Volume controls for ringer and loudspeaker.
Ringer pitch control.
The SUPERSET
7.02
Turn-key installation. Connection to local area wiring by means
of a modular jack
No additional wiring; power, signaling, and voice carried over a
single pair.
In addition, the SUPERSET 3 set provides user confidence in
7.03
handling incoming or outgoing calls. The user makes the fullest
use of all features in the user's assigned Class of Service by various
key assignments.
7.04 The SUPERSET
The dimensions of the SUPERSET 3 set, with handset on-hook,
are given in Figure 7-1. The body and handset are interconnected via a
modular detachable handset cord, plugged into the side of the body.
Line connection to the set is by means of a modular detachable line
cord, plugged into the rear of the set. An optional rear support can be
clipped in position beneath the set. This would be used when the set is
likely to be placed some distance from the user.
Body
7.05 The body of the SUPERSET 3 set comprises two parts - a base
assembly and a cover assembly.
Base Assembly
7.06 The base assembly contains a microphone (for handsfree op-
eration), the switchhook, modular jacks for the handset and line
cords, and a speaker assembly (for handsfree operation and tone
ringer output). The microphone is mounted in a position permitting it ,G.-,
to receive sound passing through an aperture in the front of the base F'p
assembly. The speaker is mounted between the handset recesses, and
3 set provides the following installation features:
3 body and handset are of plastic construction.