Mitel SX-200 Documentation page 128

SECTION MITL9105/911 O-096-1 05-NA
CALL FORWARDING - FOLLOW ME
Page 74
Description
This feature allows an extension user to have all calls which are
directed to the extension, to be forwarded to the Attendant or a
selected extension within the PBX system. The number to which the
calls are forwarded is the only originating party that may call the
forwarding extension while Call Forwarding - Follow Me is active. The
forwarding extension may originate calls in the normal manner. Exten-
sion Call Forwarding takes precedence over system Call Forwarding
(see also External Call Forwarding).
Conditions
Callbacks will always ring the originating extension - Call For-
warding has no effect.
Only one type of Call Forwarding code may be active on an
extension at any time. If an extension has one type of Call
Forwarding active and the user enters a new Call Forwarding
code, the first type of forwarding is cancelled.
Calls may not be forwarded to extensions with a COS that in-
cludes COS Option Number 38 (Never a Forwardee).
Calls may be forwarded a maximum of two steps, once at the
dialing stage (Call Forwarding - Follow Me or Call Forwarding -
Busy), and once after ringing (Call Forwarding - Don't Answer).
Call Forwarding does not apply if the calling extension (or Atten-
dant) is the party to which the call would be forwarded.
If an invalid number is selected as a forwarding number, reorder
tone is returned.
The Attendant cannot forward calls that are directed to the
console.
Calls will not be forwarded to the console during Night Service..
An extension can be call forwarded to a Hunt Group.
An extension may call forward out of a Hunt Group and that
extension then becomes busy to the Hunt Group.
Programming
Assign an access code to Feature Number 5 (Cali Forwarding -
l
Follow Me).
The COS of the forwarding extension must include Option Num-
l
ber 36 (Call Forwarding - Follow Me).
Operation
To select Call Forwarding - Follow Me:
Lift the handset - dial tone is returned.
l
Dial the Call Forward - Follow Me access code.
l
Dial the number to which the calls are to be forwarded
l
(extension number or the Attendant) - dial tone is returned.
Replace the handset - the extension is available for call origina-
l
tions.