Mitel SX-200 Documentation page 154

SECTION MITL9105/9110-096-105-NA
Page 100
To remove Do Not Disturb from the extension:
Dial the Do Not Disturb access code followed by the digit 2 -
l
dial tone is returned.
Replace the extension handset - calls may be received by the
l
extension in the normal manner.
To set up Do Not Disturb when calling the extension from the console:
Dial the required extension number - ringing tone or busy tone
l
is returned.
Press the DO NOT DSTB button - the DO NOT DSTB LED lights.
l
Press the RELEASE button - all calls to the extension are inter-
l
cepted.
To override Do Not Disturb when calling the extension from the con-
sole:
Dial the required extension number - the ERR lamp lights and the
l
DO NOT DSTB LED flashes.
Press the DO NOT DSTB button - extension rings or busy tone is
l
returned if the extension is in use. The DO NOT DSTB LED lights.
At this point, Attendant call-handling proceeds as normal.
l
Press the GUEST ROOM button.
l
Dial the required extension number.
l
all calls to the extension are intercepted.
To-remove Do Not Disturb without calling the extension:
Press the GUEST ROOM button.
l
Dial the required extension number.
l
Press the DO NOT DSTB button - the DO NOT DSTB LED is
l
extinguished - calls may be received by the extension in the
normal manner.
To display the total number of Do Not Disturbs set:
Press the DO NOT DSTB button - the busy lamp field changes to
l
show only those extensions with Do Not Disturb set and the
SOURCE display shows the total number of the Do Not Disturbs
set.