Mitel SX-200 Documentation page 289

SECTION MITL91 05/9110-096-l
SINGLE DIGIT DIALING
Page 234
05-NA
Description
This feature allows selected features, such as Hunt Groups, Trunk
Groups or extensions, to be accessed by dialing a single digit number
even though it conflicts with the system numbering plan. When pro-
gramming the system, the access code or extension number is entered
as N#, where N is any single digit number. The # character is assigned
an interdigit time-out period. If an extension dials a digit and does not
dial a second digit within the time-out period, the system assumes
that the ## character was dialed and completes the call. The # char-
acter may be dialed from an extension in place of waiting for the
time-out period.
Conditions
To access a single digit service from the Attendant Console, N##
l
must be dialed.
Features requiring an extension number to be dialed after dialing
l
the feature access code, may not be accessed by single digit
dialing.
Programming
Assign access code or extension number as N#, where N is any
l
single digit number.
System Option 213 (Single Digit Dialing Enable) must be se-
l
lected.
For an interdigit time of 3 seconds, select System Option 214
l
(Single Digit Dialing Time-Out = 3 seconds); if the interdigit
time-out period is to be 5 seconds, select System Option 215
(Single Digit Dialing Time-Out = 5 seconds). If neither of these
options are selected, the interdigit time-out is 4 seconds.
Operation
From an extension:
Dial the required single digit, wait the time-out period or dial # -
l
the call is completed.
From the Attendant Console:
Dial N#, where N is the single digit number - the call is com-
l
pleted.