Mitel SX-200 Documentation page 393

Superswitch electronic private automatic branch exchange epabx

Hide thumbs Also See for SX-200:

Table of Contents

SECTION MITL9105/9110-096-107-NA

REMINDER (AUTOMATIC WAKE-UP, ALARM CALL)

This feature allows a SUPERSET 4 user to set up a timed reminder,

such as an appointment reminder that rings the extension once at a

prearranged time. When the system rings a SUPERSET 4 set at the

prearranged time, the alphanumeric display reads DlSPlAY REMINDER

to assist the user in acknowledging the reminder. After a timed re-

minder is answered, the SUPERSET 4 set reverts to idle condition.

An extension with "Do Not Disturb" is overridden and rung at the

requested time.

The current alarm call setting can be displayed in the alphanu-

meric display by pressing the DISPLAY and REMINDER feature

buttons in that order.

To Set or Modify a Timed Reminder:

With the handset on-hook, press the PROGRAM feature button.

Press the REMINDER feature button.

Dial the alarm time in 24-hour clock format. The time is in- /

There are two ways to correct a programming error before the

SAVE feature button is pressed:

1. Use the - feature button to backspace to and clear the

incorrect entry.

2. To cancel the entire current entry, press the EXIT feature

Press the SAVE feature button. The system is now set to ring the

originating extension at the programmed time.

To Cancel a Timed Reminder:

With the handset on-hook, press the PROGRAM feature button.

Press the REMINDER feature button.

Press the CANCEL feature button.

To Acknowledge a Timed Reminder:

The SUPERSET 4 set rings once and the words DISPLAY RE-

MINDER are displayed.

Press the DISPLAY button.

Press the REMINDER feature button.

Chapters

Table of Contents