Mitel SX-200 Documentation page 174

SECTION MITL9105/9110-096-l
Page 120
OS-NA
Attendant waits until a 50 ms 'beep' is heard.
l
Attendant speaks message (up to 8 seconds in duration) into
l
handset.
Press the RELEASE button when finished.
l
To playback a message from a RAC:
Dial x241.
l
Dial RAC equipment number.
l
Dial xc.
l
Message will be heard with handset; otherwise busy tone will be
l
heard if the recording is currently in use.
Press the RELEASE button to terminate.
l
To specify the length of the message:
Dial x242.
l
Dial the Recording Group Access Code.
l
Dial the recording duration, in 2-digit seconds.
l
The SOURCE display shows:
l
Where XXXX - Recording Group Access Code
To define which Recording Group a DID intercept will be routed to:
Dial x233.
l
Dial Recording Group Access Code.
l
Press the RELEASE button to terminate.
l
To delete DID intercept routing:
Dial x233.
l
Dial ts.
l
Press the RELEASE button to terminate.
l
Operation
None