Mitel SX-200 Documentation page 273

SECTION MITL91 OS/91
PROGRAMMING SECURITY
Page 218
10-096-l OS-NA
Description
This feature allows installation or maintenance staff to program a
system without changing the switches on the Tone Control card. To
safeguard against misuse, a 2- to 4-digit security code may be used
to enter Programming.
Conditions
The Security Code cannot conflict with the numbering plan.
l
The switches on the Tone Control card must be left in a configu-
l
ration YYXY, where: Y = any digit O-9, and X is any digit except
7.
Programming
Assign a 2- to 4-digit access code to Feature Number 29
l
(Security Code).
The switches on the Tone Control card must not be set to 776X
l
(where X is the console number).
Operation
To enter the Programming Mode:
Dial the 2- to 4-digit security code.
l
Perform standard programming.
l
To enter Extended Programming Mode:
Press the NEXT button.
l
Perform extended programming.
l
To exit Extended Programming Mode:
Press NEXT button.
l
To exit Standard Programming Mode:
. Press LAMP TEST button.