Mitel SX-200 Documentation page 173

VACANT/ILLEGAL ACCESS INTERCEPT TO RECORDED
ANNOUNCEMENT
. .
Description
DID, CCSA or Dial-In calls to vacant or unauthorized levels or numbers
can be routed to the Recorder Group. If System Option 135 (Intercept
to Attendant DID, Dial-In, CCSA, Vacant, Illegal) is enabled the call wil!
(after hearing the recording) be transferred to the Attendant. If Option
135 is not enabled the caller will then receive reorder tone.
Cbnditions
A RAD must be defined by the attendant before being entered
l
into a Recording Group.
Programming
System Option 278 (SMDR Record Incoming Calls).
l
To program an equipment number for a RAD:
Dial ~230
l
Dial the RAD equipment number
l
Press the RELEASE button.
l
To delete a RAD equipment number:
Dial ~230
l
Dial the RAD equipment number
l
Dial *
l
Press the RELEASE button.
l
The review RAD programming:
Dial ~230
l
Dial the first RAD equipment number
l
Dial x for each subsequent equipment number
l
Press the RELEASE button to end.
l
To review all defined RADs/RACs:
Dial ~232~
l
will appear in the SOURCE display in the left corner and a 0 will
appear in the right corner to indicate a RAD, or 1 will appear in
the right corner to indicate a RAC.
Dial SC to advance to next RAD/RAC or press the RELEASE button
l
to terminate.
To record a message on the RAC:
Dial ~240.
l
Dial RAC equipment number.
l
Dial X.
l
SECTION MITL9105/9110-096-105-NA
Page 119